Notes And Restrictions On The Security Features - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

- File Format (with thumbnail specification): [DocuWorks] or [XPS]
Important
If settings other than the above are used, you can register a Job Flow sheet on the machine, but an error
occurs when the machine executes the Job Flow and the Job Flow cannot be carried out.
Note
XPS stands for XML Paper Specification.
Addresses Registered on Job Flows
If you specify a speed dial or an address registered on the Address Book when creating a
job flow on the machine, any subsequent change of the number or address on the Address
Book is not reflected on the job flow created. To transmit to the changed address, you must
directly correct the address registered on the job flow.

Notes and Restrictions on the Security Features

Encrypted Communication
Encrypting HTTP communication enables you to encrypt communication data for IPP
printing (SSL encrypted communication). The data is encrypted only on the network, but
send data itself is not encrypted.
Secure Watermark Kit (Optional)
When the Secure Watermark Kit (optional) is installed and [Secure Watermark Detection]
is set to [On], document scanning speed becomes slow if the following scanning settings
are selected:
- Color Scanning: [Black & White]
- Resolution: [200 dpi]
- 2 Sided Scanning: [2 Sided (Head to Head)] or [2 Sided (Head to Toe)]
Allow User to Disable Active Settings (for Forcible Printing Features)
This feature cannot apply to the ordinary print jobs. This feature is applicable to the jobs
stored in the machine and then printed by the instruction from the touch screen, such as
Copy, Secure Print, Private Charge Print, Print Stored File, Media Print - Text, and Media
Print - Photos.
IPsec
IPsec is applied to only the communications between global addresses, not the
communications between a link-local address and a global address or the
communications between link-local addresses. IP communications without IPsec are
allowed when [Communicate with Non-IPsec Devices] is set to [Enabled], and not
allowed when [Communicate with Non-IPsec Devices] is set to [Disabled].
IPsec communications between the machine and Windows with some IKE
authentication methods fail when the machine's IKE authentication method differs
from the one given the highest priority on Windows. For successful communications, set
the machine's IKE authentication method to the one given the highest priority on
Windows, or on Windows, give the highest priority to the IKE authentication method set
on the machine.
Notes and Restrictions
863
16