Remote Authentication Server/Directory Service - Fuji Xerox ApeosPort-II C4300 Function Manual

10 System Settings
HTTPS Proxy Server Password
Enter a password of the HTTPS server. Up to 31 characters are allowed.

Remote Authentication Server/Directory Service

You can make the settings for the remote authentication server and Directory Service.
Authentication System
Allows you to select the system for authentication from [Kerberos (Windows2000)],
[Kerberos (Solaris)], [LDAP] and [SMB]..
Important • After the authentication system has been changed, personal mailboxes and personal job
Kerberos Server Settings
Configure the Kerberos server settings.
Primary Server Setup
Select the primary server specification method from [By IP Address] and [By Server
Name].
Primary Server IP Address
Enter the primary server IP address using values from 0 to 255.
Note
Primary Server Name
Enter the name of the primary server. Up to 255 characters are allowed.
Note
Primary Server Port Number
Set the Primary server port number in the range from 1 to 65535.
Secondary Server Setup
Select the secondary server specification method from [By IP Address] and [By Server
Name].
Secondary Server IP Address
10
Enter the secondary server IP address using values from 0 to 255.
Note
Secondary Server Name
Enter the name of the secondary server. Up to 255 characters are allowed.
Note
114
flow sheets operated on the previous authentication system are not deleted automatically. If
these mailboxes or job flow sheets are no longer needed, delete them from the machine. If
the same user IDs are also used on the new authentication system, the personal mailboxes
and personal job flow sheets can be used by the same users.
• You can set this item when [Primary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX, 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
• You can set this item when [Primary Server Setup] is [By Server Name].
• You can set this item when [Secondary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX, 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
• You can set this item when [Secondary Server Setup] is [By Server Name].