Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 38

Before Using the Machine
6
Select the position where you want to assign a service.
Note
7
1
Select the service to assign to the selected position.
Note
8
Select [Save].
9
Select [Save].
Services Home - Additional Features
You can select additional feature buttons, which are displayed on the Services Home
screen.
If you select [(Not Assigned)], the position of the selected button becomes blank.
You cannot assign [Setup] to [(Not Assigned)]. If you do not want to display the [Setup]
button, select the [Show this in Admin mode] check box.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
38
Select [ ] to display the previous screen or [
The layout of the buttons in this screen corresponds to the layout of those on the Services Home screen.
Select [ ] to display the previous screen or [
You cannot assign the same feature to more than one button.
The default user ID is "11111".
The default passcode is "x-admin".
] to display the next screen.
] to display the next screen.