Proxy Server Settings - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Tools
E-mail Address
Enter the E-mail address of the machine with up to 128 characters.
When receiving E-mail via SMTP
You can set any name for the account (on the left side of @). Set the address section (on
the right side of @), with the combination of the host name and domain name. An alias
cannot be set.
Example: mymail@myhost.example.com
When receiving E-mails via POP3
Enter the POP user name (on the left side of @) and incoming POP3 mail server name in the
address section (on the right side of @). You can set an alias, such as
mymail@example.com.
Example: mymail@myhost.example.com
Machine Name
5
Enter the machine name with up to 32 single-byte characters.
Host Name
Enter the host name with up to 32 single-byte characters.
Important
Domain Name
Enter the domain name with up to 64 single-byte characters.

Proxy Server Settings

Configure the settings for a proxy server.
Configure a proxy server when using inbound/outbound access.
Important
Use Proxy Server
Select whether or not to use a proxy server.
Proxy Server Setup
Select the proxy server specification from [Same Proxy for All Protocols] or [Different Proxy
for Each Protocol].
Addresses to Bypass Proxy Server
Enter addresses not using the proxy server. You can specify the addresses by IPv4 address,
IPv6 address, and FQDN. You can use wildcards "*" for specifying the addresses.
244
Account name: mymail
Host name: myhost
Domain Name: example.com
Account name: mymail
When you use SMB, enter the first 15 letters of the host name. The host name must be up to 15 single-byte
characters to identify the machine properly.
Do not set this item unless you use services requiring proxy server settings.