Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 635

Error Code
033-541 [Cause] The recipient is not specified.
[Remedy] Specify the recipient correctly.
033-542 [Cause] A line was specified that is not connected.
[Remedy] Specify a connected line.
033-543 [Cause] The recipient (fax number) is incorrect.
[Remedy] Enter a correct fax number, and execute the operation again.
033-544 [Cause] The recipient's line is busy.
[Remedy] Wait for a while, and then execute the operation again.
033-545 [Cause] There was no response from the fax recipient.
[Remedy] Confirm that you specified the correct number, and execute the
operation again. If the same message is displayed again, the
recipient may not support fax, or the recipient machine may be
powered off. Ask the recipient for details.
033-546 [Cause] A dial tone was not detected.
[Remedy] Check whether the line is connected correctly.
033-547
[Cause] Communication was terminated by a cause such as pressing the
<Stop> button.
[Remedy] No measure is required.
033-548
[Cause] Cannot transmit manually because a line is unavailable.
[Remedy] Establish communication such as by telephone, and execute the
operation again.
033-549 [Cause] Cannot use the Fax service because of causes such as memory is
insufficient.
[Remedy] Wait for a while, and execute the operation again.
033-550 [Cause] Cannot execute another job because fax communication is in
progress.
[Remedy] Wait until the job being communicated completes, and then
execute the operation again.
033-551 [Cause] You attempted to change a job immediately before fax or
telephone communication completed.
[Remedy] Wait for a while, and execute the operation again.
033-552 [Cause] The total quantity of error lines detected with G3 exceeded the
set value.
[Remedy] Confirm the model of the other machine, and execute the
operation again. If receiving, ask the sender to send again.
033-553 [Cause] This machine does not have confidential or relay function. The
F-code sent from the other machine contains an instruction for
a function not supported by the machine.
[Remedy] If necessary, check whether the sender entered an invalid F-
code.
033-554 [Cause] The password was omitted or did not match in fax
communication.
[Remedy] No measure is required.
Cause and Remedy
Error Code
15
635