The Print Result Is Not What Was Expected - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Problem Solving

The Print Result is Not What was Expected

If the print result is not what was expected, identify the symptom in the following table to
perform the remedy.
15
514
Symptom
The data has The machine is out of
been sent to the paper.
machine.
No paper is loaded for the
specified paper size.
Printing is interrupted by a
copy operation.
An error occurred in the
machine.
Symptom
Cannot print in [Output Color] is set to
color. [Black and White].
Outputs are not The Finisher is not
stapled. installed.
The number of pages
to be stapled exceeds
the maximum number
for stapling.
The 2-sided printing The print page buffer
is not available. is insufficient.
Paper is not folded. The Folder Unit is not
installed.
The document is The document size is
printed on a different from the
different paper size paper size loaded in
than specified. the specified tray.
The image on the The image is larger
document edges is than the printable
missing on the area.
output.
The printed font Font replacement is
differs from the font set on the print driver.
specified on the
computer.
Cause
Load paper in the machine.
Load paper of the size specified.
Reference
Refer to "Loading Paper" (P.56).
Cancel the interrupting operation.
Check the error details and take an
appropriate action.
Cause
Set [Output Color] to [Auto Detect] or
[Color].
The Finisher is required to staple. Install
the Finisher, or change the print option
settings to cancel stapling.
Reduce papers to be less than the
maximum number for stapling.The
maximum number of pages for stapling
varies depending on the used finisher.
Reference
For more information, refer to "Specifications"
(P.712).
Set [Image Quality] to [Standard] using
the print driver. Also, set the port that is
not used to [Disable]. (Only for the
machine with the optional add-on
memory.)
Check the optional components installed
on the machine, and reconfigure the
printer configuration.
Change the size of paper in the tray, or
change the print option to specify a tray
that contains the correct sized paper.
Expand the printable area of the machine,
or reduce the image size on the printout.
Check the font replacement table.
Remedy
Remedy