Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 504

Problem Solving
15
504
Symptom
The copy is Is the document loaded
misaligned or correctly?
skewed.
Is the paper loaded correctly
in the tray?
Are the paper guides of Tray 5
correctly aligned to the
paper?
Are the document guides on
the document feeder set in
the correct positions?
Is the paper tray inserted
correctly?
Part of the image Is the paper damp?
is missing on the
copy.
Is folded or wrinkled paper
included in the tray?
Is the document pasted or
folded?
The copy has a Is the enlargement ratio too
stripe pattern. large?
Cause
Load the document correctly.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Load the paper correctly.
Reference
Refer to "Loading Paper" (P.56).
Load the paper correctly and align the
document guides to the document edges.
Reference
Refer to "Loading Paper in Tray 5 (Bypass)" (P.61).
Load the document correctly, and align the
document guides to the document edges.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Firmly push in the tray until it stops to insert it
properly.
Reference
Refer to "Loading Paper" (P.56).
If the paper is damp, the copy image may be
partially missing or unclear. Replace the
paper with a new one.
Reference
Refer to "Loading Paper" (P.56).
Remove the unsuitable paper or replace all of
the paper with a new one.
Reference
Refer to "Loading Paper" (P.56).
The pasted or folded section may not be
laying flat on the document glass. Place a
stack of white sheets on top of the document
to flatten the document against the
document glass.
Vertical stripes may be printed on the copies
depending on the ratio. Adjust the ratio to
eliminate the stripes.
Reference
Refer to "Copy" > "Copy" > "Reduce/Enlarge (Making
Enlarged/Reduced Copies)" in the User Guide.
Remedy