Paper Jams In C3 Finisher / C3 Finisher With Booklet Maker - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Problem Solving
2
Remove the jammed paper.
3
Close the finisher top cover.

Paper Jams in C3 Finisher / C3 Finisher with Booklet Maker

The following describes how to clear paper jams inside the finisher when the C3 Finisher
(optional) or the C3 Finisher with Booklet Maker (optional) is installed.
Paper Jams in the Center Tray
1
If you can see the edge of the jammed paper on the center tray, gently pull the paper to
the right.
2
Open the top cover of the finisher transport, and then close it.
15
682
Note
If the paper is torn, make sure no piece of paper remains inside the machine.
Note
Remedy differs depending on where the paper jam occurs. Follow the instructions displayed and remove the
jammed paper.