Print Universal Unique Id; Image Log Control - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Tools

Print Universal Unique ID

You can print UUIDs (Universal Unique IDs) for each print job to identify each job.
The printed UUIDs can be used as a search key to retrieve print job logs using an
application, such as ApeosWare Management Suite (sold separately). Retrieving the image
log with the UUID enables you to verify "when", "by whom", and "with what service" the
document was processed. This prevents leakage of confidential information.
Note
Reference
Print Universal Unique ID
Select whether or not to print Universal Unique IDs.
Important
Print Position
5
Select a print position from six positions: [Top Left], [Bottom Left], [Top Center], [Bottom
Center], [Top Right], or [Bottom Right].
Print Position Adjustment
Adjust print positions vertically and horizontally from 0 to 100 mm and from 0 to 200 mm
respectively, in 0.5 mm increments.
Note
Print Position (Side 2)
Select the position to print the UUID on Side 2 from [Same as Side 1] or [Mirror Side 1]
when making 2 sided copies.

Image Log Control

The Image Log Control is a feature that creates image data of documents processed on the
machine and stores the image data with other information such as the user of the job, time,
196
You can authorize a user to temporarily cancel force watermark printing. For more information, refer to "User
Roles and Authorization Groups" (P.466).
If a layout template is specified in [Apply Layout Template to Copy/Print Jobs] under [Force Annotation],
UUIDs are overlapped with the text on the layout template.
For details on image logs, refer to "Image Log Control" (P.196).
For details on Force Annotation, refer to "Force Annotation" (P.194).
If [Print Universal Unique ID] is set to [Yes], you cannot select [Auto Detect] for [Tray 5].
0 mm is at the edge of paper. Increasing the value moves the print position toward the center of the paper.
However, for [Top Center] or [Bottom Center], the horizontal value for the center of paper is set to 100 mm.
Therefore, when you select [Top Center] or [Bottom Center], set the value to 100 mm and then specify
desired value.