Step3 Configuration On The Computer - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Encryption and Digital Signature Settings
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
3
Select [Tools] on the Services Home screen.
4
Select [Connectivity & Network Setup].
5
Select [Security Settings].
6
Select [IPsec Settings].
7
Configure the required settings.
8
Select [Close].

Step3 Configuration on the Computer

The following describes the configuration procedures on the computer.
Configure the following settings on the computer.
13
456
Note
The default user ID is "11111".
The default passcode is "x-admin".
Reference
For details on the settings, refer to "IPsec Settings" (P.261).
Create an IP security policy
Assign the IP security policy
Reference
For details on the settings, refer to the help of the computer.