Density Uniformity Adjustment (Semi Auto Process Using Scanner) - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Appendix
Density Uniformity Adjustment (Semi Auto Process
Using Scanner)
This section describes semi auto adjustment of the density uniformity.
Density Uniformity Adjustment
You can adjust output image (density).
1
Load paper in a tray.
2
Press the <Log In/Out> button, and then enter the System Administration mode.
3
Select [Tools] on the Services Home screen.
4
Select [System Settings] > [Common Service Settings] > [Maintenance].
5
Select [Density Uniformity Adjustment].
16
756
Note
Output paper for the density uniformity adjustment is counted for the number of printed pages. For more
information, refer to "Billing Information" (P.150).
When using a smart card authentication system such as IC Card Gate, you may be requested authentication
before printing or scanning a calibration chart.
Note
Load paper of 210 mm x 210 mm or larger.
If you use colored paper or paper with dark ground color, it may result in an adjustment failure.
Reference
For how to enter the System Administration mode, refer to "System Settings Procedure" (P.156).
Note
Select [ ] to return to the previous screen or [ ] to move to the next screen.