Fuji Xerox ApeosPort-VI C7771 Administrator's Manual page 664

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Problem Solving

"133-001" - "148-999"

An error occurred during fax transmission.

[Remedy] Switch off the machine power, make sure that the touch screen

is blank, and then switch on the machine power. If the error still

is not resolved, contact our Customer Support Center.

A country code not supported by the machine was specified.

[Remedy] Contact our Customer Support Center.

An error occurred during fax transmission.

[Remedy] Switch off the machine power, make sure that the touch screen

is blank, and then switch on the machine power. If the error still

is not resolved, contact our Customer Support Center.

The staple/hole punch setting was cancelled.

[Remedy] Check whether the staple/hole punch position is correct, and

then execute the operation again.

Unavailable characters are included in Name, Company Logo,

Fax Comment, or Local Name and the characters are converted.

[Remedy] Enter available characters to Name, Company Logo, Fax

Comment, or Local Name.

If this error persists, check the settings for the local station. Only

the characters available on the keyboard of the control panel

can be used for the name of the local station.

When the available characters are not clear, enter alphanumeric

characters only.

Cause and Remedy