Setting The Screen After Auto Clear - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

5
Select [Screen Default], and then select [Change Settings].
Note
Select [
6
Select a service you want to display.
Note
Select [
7
Select [Save].

Setting the Screen After Auto Clear

You can select the screen to be displayed after Auto Clear from [Last Selection Screen] or
[Services Home].
Reference
For information on Auto Clear, refer to "Auto Clear" (P.165).
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
The default user ID is "11111".
The default passcode is "x-admin".
] to display the previous screen or [
] to display the previous screen or [
Customizing the Control Panel
] to display the next screen.
] to display the next screen.
1
33