Notes And Restrictions For Print E-Mail - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Appendix

Notes and Restrictions for Print E-mail

Print E-mail
The machine cancels receiving e-mails but does not display error codes when disk space is
16
insufficient.
868
The machine may display an incorrect machine address. Example: Either the IPv4 or IPv6
address is not displayed in Dual Stack mode. A different IPv6 address is displayed.
When a document is printed via an IPv6 network, the Secure Watermark feature is not
available.
A time synchronization server cannot be specified in IPv6 format. Use the IPv4 format to
specify a time synchronization server directly.
WINS does not support IPv6 communication.
When a self-signed certificate is used for SSL communication, observe the following
restrictions when specifying the printer URL:
- When specifying the machine by using the domain name (for IPv4 or IPv6): Set the
host name and domain name for the machine before creating a self-signed certificate.
Example: When the FQDN is "csw.ipv6.domain.local", specify csw for the host name,
and ipv6.domain.local for the domain name.
- When specifying the machine by using the IPv4 address: Import a self-signed
certificate that is created in IPv4 or Dual-Stack mode.
- When specifying the machine by using the IPv6 address: Secure IPP (IPP-S)
communication is not available.
When IPv6 is enabled and IPv4 is disabled on the machine, you cannot specify a storage
location for the Browse function of the Scan to PC (SMB) service.
When the Scan to PC (FTP) service is used, only ASCII characters can be used for file
names.
In the following cases, since the addresses may not be recognized as those of the same
machine, the lpq command (for status check) and the lprm command (for canceling)
may not be available for LPD print jobs.
- When simultaneously operating IPv4 and IPv6 addresses with the same host
- When simultaneously operating multiple IPv6 addresses with the same host
IPv6 addresses may not be correctly recorded on job logs. Use an IPv4 network for
correct logging.
When searching a device outside the router via SMB, directly specify the address.
Multicasting is supported only within a local link (FF02::1).
In an IPv6 environment without a DNS server, if a computer name is specified in the SMB
server settings for SMB authentication, the authentication fails. Specify the IPv6 address
directly for a computer name of the authentication server.
If you specify an IPv6 address as a destination URL using a remote access service, such
as DocuShare, the address does not operate correctly. In an IPv6 environment, use a DNS
server and specify a remote service' s destination URL by using the FQDN.