7
Select [Fold Position Type Setup], and then select [Change Settings].
8
Select a type, and select [Change Settings].
9
Select [Name], and select [Change Settings].
10
Enter the type name, and then select [Save].
Note
We recommend you to use a name such as "Single Fold Plain" that allows you to know what the content is.
11
Select the fold type, and then select [Change Settings].
Reference
For details on making each fold adjustment, refer to the following sections.
For single fold, refer to "Single Fold Position Adjustment" (P.765).
For booklet, refer to "Booklet Position Adjustment" (P.767).
For C fold, refer to "C Fold Position Adjustment" (P.769).
For Z fold, refer to "Z Fold Position Adjustment" (P.771).
For Z fold half sheet, refer to "Z Fold Half Sheet Position Adjustment" (P.773).
Single Fold Position Adjustment
Adjust the single fold position.
Fold Position Adjustment
765
16