Installation Procedure; Installation Overview; Step 1 Fax Settings - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Using the Server Fax Service

Installation Procedure

Installation Overview

This section describes the configuration procedure to use the Server Fax feature on the
machine.

Step 1 Fax Settings

If your machine does not support the Fax feature and supports the Server Fax feature only,
the Server Fax feature will be enabled automatically. If your machine supports both the Fax
and Server Fax features, manually switch to the Server Fax feature.
The following procedure explains how to switch to the Server Fax feature on CentreWare
Internet Services.
1
Start a web browser.
2
Enter the machine's IP address or the Internet address into the address box on the browser,
and then press the <Enter> key.
3
Click the [Properties] tab.
12
4
Click [Services] to display the items in the folder.
5
Click [Fax] to display the items in the folder.
6
Click [Fax Settings].
7
On the [Fax Settings] screen, select [Scan to Fax Server] under [Fax Service].
8
Set the values as the machine's setting values.
1) Click [Apply].
2) The right frame on the web browser will change to the machine reboot display.
3) Click [Reboot Machine]. The machine reboots and the setting values are enabled.
442
Reference
For information on how to use CentreWare Internet Services, refer to "Configuring Machine Settings Using CentreWare Internet
Services" (P.369).
Note
You can switch to the Server Fax feature also on the machine's control panel.
Example of the IP address entry
http://192.0.2.1/ (IPv4)
http://[2001:DB8::1234] (IPv6)
Example of the Internet address entry
http://myhost.example.com/
Note
When specifying a port number, add ":" and the port number to the end of the Internet address.