Step 2 Configuring E-Mail Environment - Fuji Xerox ApeosPort-VI C7771 Administrator's Manual

Hide thumbs Also See for ApeosPort-VI C7771:
Table of Contents

Advertisement

E-mail Environment Settings
obtained automatically or manual configuration is preferred, confirm the settings of an IP
address, a subnet mask, and a gateway address.
Reference
4
Select [Close] repeatedly until the [Tools] screen is displayed.
5
Select [Close].
Note
6
Print a configuration report to confirm that the ports are enabled and that TCP/IP is set up
correctly.
Reference

Step 2 Configuring E-mail Environment

The following describes the configuration procedures to use the E-mail features.
Reference
1
Display the [Tools] screen.
8
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
3) Select [Tools] on the Services Home screen.
2
Set up the e-mail address of the machine.
1) Select [Connectivity & Network Setup].
2) Select [Machine's E-mail Address/Host Name], and then configure items.
Reference
3) Select [Close] repeatedly until the [Tools] screen is displayed.
3
Set up the protocol to receive e-mails.
1) Select [Connectivity & Network Setup].
394
For information on how to set an IP address, refer to "Protocol Settings" (P.239).
Rebooting the machine may be required depending on the settings. When a message displayed on the
screen, follow the message and reboot the machine.
For information on how to print a configuration report, refer to "Print Reports" (P.131).
You can configure the settings using CentreWare Internet Services. For the items that can be configured using CentreWare
Internet Services, refer to "CentreWare Internet Services Setting Items" (P.396).
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.368).
displayed on the screen, and select [Enter].
The default user ID is "11111".
The default passcode is "x-admin".
For information on how to set an e-mail address, refer to "Machine's E-mail Address/Host Name" (P.243).

Advertisement

Table of Contents
loading

Table of Contents