Print Mode - SATO FX3-LX Driver Manual

Hide thumbs Also See for FX3-LX:

Table of Contents

4.3

Print Mode

[Operation mode]

Set the print mode. The available settings vary depending on the printer model and attached

options.

[Backfeed mode]

Specify the backfeed operation for the [Operation mode] setting. You can configure this setting

when [Operation mode] is set to [Cutter]. Select [Before printing] or [After printing].

[Backfeed offset]

You can finely adjust the media stop position during backfeed operation.

[Pitch offset]

You can finely adjust the media stop position during forward feed operation.

[Type]

Specify how the cutter operates when [Operation mode] is set to [Cutter]. Select [Off], [Batch], or

[Every label]. If you select [Batch], the page is cut at the end of the print job.

[Cut every]

Specify the number of pages to cut at when [Type] is set to [Every label].

Table of Contents