Table of Contents
Advertisement
Memory of the Product
Product Memory and USB Memory
The user registration area of the product is a maximum of 2GB.
However, you cannot use the whole memory of the user area, because this area is also used for the
log data and HEX dump functions.
Note that, USB memory can be connected to the product. There is no capacity limit for USB memory.
A USB memory can be connected to the USB connector (Mini-B) on the side of the product.
What you can do by connecting a USB memory to the product is as follows:
•
Get the HEX dump data
•
Install certificates used for Wi-Fi authentication and for HTTPS
•
Create a clone (copy the product's setting information)
•
Apply setting information saved to a clone
•
Be sure to perform a virus check on the USB memory before connecting it to the
product. SATO Corporation shall not be held responsible for any product malfunctions
caused by a virus spread via USB memory.
•
To connect a USB memory to the product, you need a USB host cable (Mini-B).
•
The product does not support USB memory with security functions such as fingerprint
authentications.
•
The product does not support connection through the USB HUB.
•
Use USB memories that are formatted to FAT32.
70
Product Memory and USB Memory
Advertisement
Table of Contents
