Table of Contents
Advertisement
[ESC+BQ] QR Code (Compatible command)
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying 2D code QR code.
[Format] (Setup part)
Manual setup: <BQ>abcc,(ddeeff,)g(hhhh)n
Auto setup: <BQ>abcc,(ddeeff,)n
-
Parameter
a [Error correction level]
1 : 7% High density level (L)
2 : 15% Standard level (M)
3 : 30% High reliability level (H)
4 : 25% reliability level (Q)
b [Concatenation mode]
0 : Normal mode
1 : Concatenation mode
c [Size of one side of cell]
Valid Range : 01 to 32 (dot)
e.x.) cc=04
4 dots
d [Number of partitions by concatenation mode]
Valid range : 01 to 16
e [Sequential number partitioned by concatenation mode]
Valid range : 01 to 16
f [Concatenation mode parity data]
Valid range : 00 to FF
g [Character mode]
1 : Number mode
2 : Alphanumeric mode
3 : Binary mode
4 : Kanji mode
h [Number of data]
Valid range : 01 to 7366 (dots)
n [Print data] = Data
ESC
BQ
<1B>
<42>
16
None
When the power is OFF
Valid range within items
Valid range between items
Feed direction
4 dots
Parameter
<51>
Manual setup: abcc,(ddeeff,)g(hhhh)n
16
16
Auto setup: abcc,(ddeeff,)n
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
262
Advertisement
Table of Contents
