Removing The Power Supply Cooling Fan (Fan6); Replacement Procedure - Canon imageRUNNER 2545 Series Service Manual

4
Parts Replacement and Cleaning > PCB > Removing the Power Supply Cooling Fan (FAN6) > Replacement Procedure

Removing the Power Supply Cooling Fan (FAN6)

■ Replacement Procedure

1) Remove the rear cover (right).("Removing the Reader Rear Cover"(page
2) Remove the lower rear cover.("Removing the Lower Rear Cover"(page
3) If equipped with the heater PCB, remove the heater
PCB"(page 4-46).)
4) Remove the power supply cooling fan.
- 1 connector
- 2 claws
x2
x1
4 Parts Replacement and Cleaning > PCB > Removing the Power Supply Cooling Fan (FAN6) > Replacement Procedure
4-20).)
4-22).)
PCB.("Removing the Heater
F-4-134
4-58
4-58