As-Feature-Event Subscription - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
Use the following parameters to configure Missed Call Summary Subscription feature on a
per-line basis:
Per-Line Parameter
• sip lineN missed call summary subscription
CONFIGURATION FILES
For the specific parameters you can set in the configuration files for Missed Call Summary
Subscription, see Appendix A, the section,
.
page A-102

AS-FEATURE-EVENT SUBSCRIPTION

The IP phones support server-side Do Not Disturb (DND), Call Forward (CFWD), and Automatic
Call Distribution (ACD) feature events. This feature is called "as-feature-event" and works with
the DND, CFWD, and ACD keys.
This feature is configurable using the configuration files or the Mitel Web UI.
HOW IT WORKS ON THE PHONE UI
When you enable the "as-feature-event" on the phone, AND you activate a DND, CFWD, and/or
ACD key, pressing the key performs as follows:
• If the key is configured for an account on the phone, the server applies DND, CFWD or
ACD to that account. (For information about CFWD and DND account configuration, see
Chapter 3, the section,
• If the key is "custom" configured, a screen displays on the phone allowing the user to choose
the account to apply DND or CFWD. (For information about CFWD and DND custom
configuration, see Chapter 3, the section,
• A solid "Message Waiting Indicator" (MWI) indicates if one line/account has DND or CFWD
enabled, and the LED next to the DND/CFWD key is ON. A status displays on the LCD that
indicates the status of the line in focus (for example, the status of CFWD could be "Call
Forward Busy" (CFWDB) or "Call Forward No Answer" (CFWDNA).
Note: If the ACD key is configured on the phone, and the "as-feature-event" is not
enabled, the phones uses the ACD icons and LED behavior from a Sylantro/BroadWorks
server instead.
When you press the DND, CFWD, or ACD key, only one attempt is made to enable/disable the
"as-feature-event" feature on the server. The message "Trying" displays on the phone's LCD
after pressing the key. If the attempt is successful, the idle screen displays. If the attempt is
unsuccessful, the message "Failed" displays. The user can press the softkey again to re-attempt
the feature if required.
For server-side ACD, when you press the ACD softkey, the screen that displays is dependent
on the state of the ACD subscription. Possible state for ACD are:
• Logged Out - User has the option of logging in.
6-14
"Missed Call Summary Subscription Settings"
"Account Configuration"
"Account Configuration"
on page 3-37).
on page
on
3-37).