A global value of 0.0.0.0 disables registration. However, the phone is still active and you
can dial using username@ip address of the phone.
If the Registrar IP address is set to 0.0.0.0 for a per-line basis (i.e, line 1, line 2, etc.), then
the register request is not sent, the "No Service" message does not display, and the mes-
sage waiting indicator (MWI) does not come on.
8. In the Registrar Port field, enter a Registrar Port number in the Registrar Port field for
accessing the SIP registrar server. For example, 5060. Default is 0.
9. Press the Save softkey.
For the 6873i:
Note: You can set global configuration only using the IP Phone UI.
IP PHONE UI
1. Press
on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password and press the blue Enter key. Default is "22222".
4. Press the SIP icon.
Note: If required, swipe left on the screen to navigate to the second page of options.
5. Press the Call Server icon.
Configuring Proxy IP and Proxy Port:
6. In the Proxy Server field, enter an IP address or fully qualified host name in the Proxy
Server field. Default is 0.0.0.0.
7. In the Proxy Port field, enter a Proxy Port number in the Proxy Port field for accessing
the SIP proxy server. For example, 5060. Default is 0.
Configuring Registrar IP and Registrar Port:
8. In the Registrar Server, enter an IP address or fully qualified host name in the Registrar
Server field. Default is 0.0.0.0.
A global value of 0.0.0.0 disables registration. However, the phone is still active and you
can dial using username@ip address of the phone.
If the Registrar IP address is set to 0.0.0.0 for a per-line basis (i.e, line 1, line 2, etc.), then
the register request is not sent, the "No Service" message does not display, and the mes-
sage waiting indicator (MWI) does not come on.
9. In the Registrar Port field, enter a Registrar Port number in the Registrar Port field for
accessing the SIP registrar server. For example, 5060. Default is 0.
10. Press the Save softkey.
Global SIP Settings
4-74