Mitel 6867i Administrator's Manual page 780

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
sip lineN bla number
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-82
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to assign a phone number that is shared on specific lines
on the IP phone.
For Sylantro Server:
When configuring the BLA feature on a Sylantro server, the value set
for the sip lineN bla number parameter shall be the same value set
for the sip lineN user name parameter for all the phones in the
group. For example, if sip lineN user name is 1010, you would
configure BLA on a per-line basis for the Sylantro server as follows:
sip line1 user name: 1010 (# for all the phones)
sip line1 bla number: 1010
For ININ Server:
When configuring the BLA feature on an ININ server, the value set
for the sip lineN bla number parameter shall be the same value set
for the sip lineN user name parameter without the incremented digit
added to the phone #. For example, if the sip lineN user name for
the first phone is 10101, and the sip lineN user name for the second
phone is 10102, etc. you would configure BLA on a per-line basis for
the ININ server as follows:
sip line1 user name: 10101 (# for phone 1 with)
sip line1 bla number: 1010 (appearance of phone 3)
sip line1 user name: 10102(# for phone 2 with)
sip line1 bla number: 1010 (appearance of phone 3)
sip line1 user name: 1010(# for phone 3)
sip line1 bla number: 1010
Note: The original phone number which has the bridged line
appearance on other phones, will have the "sip lineN user name"
parameter the same as the "sip lineN bla number" (1010 in the above
example on Phone 3).
Integer
N/A
N/A
Sylantro Server:
sip line1 bla number: 1010
ININ Server:
sip line 1 bla number: 1010