Option To Remove The "More" Softkey When Not Required - Mitel 6867i Administrator's Manual

Operational Features
For specific parameters you can set in the configuration files, see Appendix A, the section,
on .
"Configurable Positioning of Programmed Softkeys" page A-225

OPTION TO REMOVE THE "MORE" SOFTKEY WHEN NOT REQUIRED

Note: Applicable to the 6867i, 6869i, and 6873i IP phones only.
Administrators can control how softkeys are displayed on the IP phones' screens when the
number of softkeys configured matches the exact number of softkey buttons on the phone.
For example, the 6867i has a total of six physical top softkey buttons and four physical bottom
softkey buttons. By default, when a total of six top softkeys and four bottom softkeys are
configured, the screen displays five top softkeys and three bottom softkeys along with "More"
options to access the remaining softkeys.
By enabling the "collapsed more softkey screen" parameter, in the scenario above, the "More"
softkey is removed in both places allowing the phones to display all configured top and bottom
softkeys on one screen.
Default Screen 1
Parameter Enabled
Default Screen 2
5-154