Mitel 6867i Administrator's Manual page 313

Example
The following is an example of the parameters you would enter in the <MAC>.cfg file to load a
French, Italian, German, and Spanish language pack to the IP phone.
language 1: lang_fr_ca.txt
language 2: lang_it.txt
language 3: lang_de.txt
language 4: lang_es.txt
The above entries in the <MAC>.cfg file tells the phone which language packs to load. When
the language pack(s) have loaded, you must then use the configuration files IP Phone UI to
specify which language to display on the IP phone. You must use the Mitel Web UI to specify
the language to use in the Web UI.
References
For more information about specifying the language to use, see the section,
Screen Language to Use"
For more information about language codes and country codes, see Appendix A, the section,
"Language Pack Settings"
Loading Language Packs via the Mitel Web UI
Using the Mitel Web UI, you can specify a language pack to load using the parameters at Basic
Settings->Preferences->Language Settings.
You use the following fields in the Mitel Web UI to specify which language packs to load:
Once the language pack is loaded to the phone, it is available for selection from either the
configuration files, the IP Phone UI or the Mitel Web UI.
SPECIFYING THE SCREEN LANGUAGE TO USE
Once the language pack(s) have loaded, you must then specify which language to use on the
phone. After the phone has booted up, you can specify which language(s) to use. You can use
the configuration files (via the "language" parameter) and the IP Phone UI to specify the
on page 5-52.
on page 193.
Operational Features
"Specifying the
5-52