Stuttered Dial Tone Setting - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

STUTTERED DIAL TONE SETTING

PARAMETER –
stutter disabled
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
MESSAGE WAITING INDICATOR SETTINGS
PARAMETER –
mwi led line
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
MESSAGE WAITING INDICATOR REQUEST URI SETTING
PARAMETER –
sip linex mwi request uri
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-180
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enable or disables the playing of a stuttered dial tone when there is
a message waiting on the IP phone.
Boolean
0 (false)
0 (false)
1 (true)
stutter disabled: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to enable the Message Waiting Indicator (MWI) on a
single line or on all lines on the phone. For example, if you set this
parameter to 3, the LED illuminates if a voicemail is pending on line
3. If you set this parameter to 0, the LED illuminates if a voicemail is
pending on any line on the phone.
Note: To enable MWI for all lines in the configuration files, set this
parameter to zero (0). The enable MWI for all lines in the Mitel Web
UI, select "All" in the "Message Waiting Indicator Line" field.
Integer
0 (all lines)
0-2 (6863i)
0-24 (6865i/6867i/6869i/6873i)
mwi led line: 3
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the URI to use when specifying which proxy server
Notes:
• Quotes (") must be used to enclose the value when specifying it
with this parameter.
• Sip Explicit MWI Subscription must be enabled to use this feature.
"sip:user@host:port"
N/A
N/A
sip line1 mwi request uri: "sip:1020@10.50.224.53"