Module/Debug Level Settings - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

MODULE/DEBUG LEVEL SETTINGS

The Mitel IP phones provide blog module support that allows enhanced severity filtering of log
calls sent as blog output.
The blog, as used on the IP phones, is a an online debugging tool that can be frequently updated
and intended for technical support analysis. Blogs are defined by their format: a series of entries
posted to a single page in reverse-chronological order. The IP Phone blogs are separated into
modules which allow you to log specific information for analyzing.
Note: Enabling the syslog module and configuring debug levels should only be used for
support purposes. Mitel recommends Administrators leave the debug level at its default
for normal production use. Enabling all the debug levels on the phone may impact
performance and normal operation of the phone.
The following table identifies the blog modules you can set.
MITEL WEB UI PARAMETERS
LINMGR (Line Manager information)
UI (User Interface (UI) related)
MISC (Miscellaneous)
SIP (Call control SIP stack)
DIS (Display drivers)
DSTORE (Delayed storage)
EPT (Endpoint module)
IND (Indicator module)
KBD (Keyboard module)
NET (Network module)
PROVIS (Provisioning module)
RTPT (Realtime Transport module)
SND (Sound module)
PROF (Profiler module)
XML (Extension Markup Language)
LLDP (Link Layer Discovery Protocol)
9-4
CONFIGURATION FILE PARAMETERS
log module linemgr
log module user interface
log module misc
log module sip
log module dis
log module dstore
log module ept
log module ind
log module kbd
log module net
log module provis
log module rtpt
log module snd
log module prof
log module xml
log module lldp