Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
SIP SETTINGS
The following paragraphs describe the SIP parameters you can configure on the IP phone. SIP
configuration consists of configuring:
•
Basic SIP Authentication Settings
•
Basic SIP Network Settings
•
Advanced SIP settings
•
RTP Settings
•
Autodial Settings
Notes:
1. Specific parameters are configurable on a global and per-line basis. You can also
configure specific parameters using the IP Phone UI, the Mitel Web UI, or the
configuration files. If you have a proxy server or have a SIP registrar present at a
different location than the PBX server, the SIP parameters may need to be changed.
2. For the 6863i and 6865i, Global SIP settings are applicable only to Lines 1 and 2.
For the 6867i , 6869i, and 6873i, Global SIP settings are applicable only to Lines 1
to 4. To configure lines that do not have an associated Line hard key, Administrators
must configure each individual line manually.
3. The IP phones allow you to define different SIP lines with the same account
information (i.e. same user name) but with different registrar and proxy IP addresses.
This feature works with Registration, Subscription, and Notify processing. This
feature also works with the following types of calls: incoming, outgoing, BroadSoft
Shared Call Appearance (SCA), Bridged Line Appearance (BLA), conference,
transfer, blind transfer.
3-48