Backlight Mode Settings - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
dst end hour
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

BACKLIGHT MODE SETTINGS

Note: The parameter "backlight mode" is applicable to the 6865i IP phone only while
the "bl on time" parameter is applicable to the 6865i, 6867i, 6869i, and 6873i IP phones.
PARAMETER –
backlight mode
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
bl on time
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-60
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The hour that DST ends. Valid values are an integer from 0
(midnight) to 23.
Integer
N/A
0 (midnight) to 23
dst end hour: 23
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to turn the backlight on the LCD, Off (always off) or Auto.
The "Auto" setting sets the phone to turn off the backlight after a
period of inactivity. You can set the amount of time before the
backlight goes off using the "Backlight on Time" option ("bl on time"
parameter).
Integer
1 (Auto)
0 (Off - Turns the backlight off constant)
1 (Auto - Turns the backlight off after a period of inactivity.)
Note: In the IP Phone UI, the options for this parameter are "Off" and
"Auto" only.
backlight mode: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to set the amount of time, in seconds, that the backlight
stays ON before turning OFF because of inactivity.
Note: For the 6865i, the backlight mode must be set to "Auto" before
this parameter can take effect.
Integer
600 seconds (equals 10 minutes)
1-36000 seconds
bl on time: 15