Mitel 6867i Administrator's Manual page 1012

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
## HTTP server settings (for http://bogus.mitel.com/firmware/)
#http server: bogus.mitel.com
#http path: firmware
#-------------------------------------------------------------------
# Dial Plan Settings
# =====================
#
# Notes:
#
# As you dial a number on the phone, the phone will initiate a call
# when one of the following conditions are meet:
#
# (1) The entered number is an exact match in the dial plan
# (2) The "#" symbol has been pressed
# (3) A timeout occurs
#
# The dial plan is a regular expression that supports the following
# syntax:
#
# 0,1,2,3,4,5,6,7,8,9,*,#
# x
# +
#
# []
#
#
# ()
# |
#
#
# If the dialled number doesn't match the dial plan then the call
# is rejected.
sip digit timeout: 3
# Example dial plans
sip dial plan: "x+#|xx+*"
#sip dial plan: [01]xxx|[2-8]xxxx|91xxxxxxxxxx
#sip dial plan terminator: 1
#------------------------------------------------------------------
C-6
# can be IP or FQDN
: matches the keypad symbols
: matches any digit (0...9)
: matches 0 or more repetitions of the
: previous expression
: matches any number inside the brackets
: can be used with a "-" to represent a
: range
: expression grouping
: either or
# set the inter-digit timeout in seconds
# this is the default dial string, note
# that is must be quoted since it contains
# a '#' character
# accept any 4 digit number beginning
# with a 0 or 1, any 5 digit number
# beginning with a number between 2 and 8
# (inclusive) or a 12 digit number
# beginning with 91
# enable sending of the "#" symbol to
# to the proxy in the dial string