Mitel 6867i Administrator's Manual page 304

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
that may result from the use of non-verified headsets, or from incorrectly connecting headsets
or cables.
WARNING:
1. THE HEADSET PORT IS FOR HEADSET USE ONLY. PLUGGING ANY OTHER
DEVICES INTO THIS PORT MAY CAUSE DAMAGE TO THE PHONE AND WILL
VOID YOUR WARRANTY.
2. CUSTOMERS SHOULD READ AND OBSERVE ALL SAFETY
RECOMMENDATIONS CONTAINED IN HEADSET OPERATING GUIDES
WHEN USING ANY HEADSET.
REFERENCE
For more information about installing a DHSG headset on your phone, see the IP
Phone-Specific Installation Guide.
CONFIGURING DHSG ON THE PHONE
You can enable or disable the use of a DHSG headset using the parameter "dhsg" in the
configuration files, or at the location Options->Preferences->Set Audio->DHSG in the IP
Phone UI. Default for DHSG is disabled (OFF).
Configuring DHSG Using the Configuration Files
Use the following information to configure the use of a DHSG headset on the IP Phones.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"DHSG Settings"
5-43
on .
page A-65