Mitel 6867i Administrator's Manual page 362

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
1. Press
2. Press the Advanced softkey.
3. Enter the Administrator password and press the blue Enter key. Default is "22222".
4. Press the Network icon.
Note: If required, swipe left on the screen to navigate to the second page of options.
5. Press the LLDP icon.
This option enables or disables Link Layer Discovery Protocol for Media Endpoint Devices
(LLDP-MED) on the IP Phone.
Note: If required, swipe left on the screen to navigate to the second page of options.
6. Choose Enabled or Disabled.
7. Press the Save softkey.
Use the following procedure to configure LLDP-MED using the Mitel Web UI:
MITEL WEB UI
1. Click on Advanced Settings->Network->Advanced Network Settings.
2. The "LLDP" field is enabled by default. To disable LLDP, click the check mark in the box
to clear the check mark.
3. In the "LLDP Packet Interval" field, enter the time, in seconds, between the transmission
of LLDP Data Unit (LLDPDU) packets.
The value of zero (0) disables this parameter. Valid values are 0 to 2147483647. Default
is 30.
4. Click Save Settings to save your changes.
5-101
to enter the Options List.