Mitel 6867i Administrator's Manual page 125

PARAMETER IN PARAMETERS IN
MITEL WEB UI CONFIGURATION
FILES
Send MAC Address in sip send mac
REGISTER Message
Send Line Number in sip send line
REGISTER Message
Session Timer sip session timer
Timer 1 and Timer 2 sip T1 timer
sip T2 timer
Transaction Timer sip transaction timer
Administrator Level Options
DESCRIPTION
Adds an "Aastra-Mac:" header to the SIP
REGISTER messages sent from the phone to the
call server, where the value is the MAC address of
the phone.
For more information about this parameter, see
Chapter 6, the section, "TR-069 Support"
page 6-8.
Adds an "Aastra-Line:" header to the SIP
REGISTER messages sent from the phone to the
call server, where the value is the line number that
is being registered.
For more information about this parameter, see
Chapter 6, the section, "TR-069 Support"
page 6-8.
The time, in seconds, that the IP phone uses to
send periodic re-INVITE requests to keep a
session alive. The proxy uses these re-INVITE
requests to maintain the status' of the connected
sessions. See RFC4028 for details. Default is 0.
For more information, see Chapter 4,
SIP Settings (optional)" on
These timers are SIP transaction layer timers
defined in RFC 3261. Timer 1 is an estimate, in
milliseconds, of the round-trip time (RTT). Timer 2
represents the amount of time, in milliseconds, a
non-INVITE server transaction takes to respond to
a request.
For more information, see Chapter 4,
SIP Settings (optional)" on
The amount of time, in milliseconds that the phone
allows the call server (registrar/proxy) to respond
to SIP messages that it sends. If the phone does
not receive a response in the amount of time
designated for this parameter, the phone assumes
the message has timed out.
For more information, see Chapter 4,
SIP Settings (optional)" on
on
on
"Advanced
page 4-77.
"Advanced
page 4-77.
"Advanced
page 4-77.
3-55