Mitel 6867i Administrator's Manual page 1018

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
# Additional Network Settings
# ============================
#sip rtp port: 3000
#-----------------------------------------------------------------
# Configuration Server Settings
# = = = = = = = = = = = = = =
# Notes: This section defines which server the phone retrieves new
# firmware images and configuration files from.
# are supported TFTP, FTP and HTTP
download protocol: TFTP
## TFTP server settings
tftp server: 192.168.0.130
#alternate tftp server:
#use alternate tftp server: 1 # If your DHCP server assigns
# a TFTP server address which
# you do not use, you can use
# the alternate tftp server.
## FTP server settings
#ftp server: 192.168.0.131
#ftp username: mitel
#ftp password: 6865imitel
## HTTP server settings (for http://bogus.mitel.com/firmware/)
#http server: bogus.mitel.com
#http path: firmware
#----------------------------------------------------------------
# Dial Plan Settings
# ====================
#
# Notes:
#
# As you dial a number on the phone, the phone will initiate a call
# when one of the following conditions are meet:
#
# (1) The entered number is an exact match in the dial plan
# (2) The "#" symbol has been pressed
# (3) A timeout occurs
#
# The dial plan is a regular expression that supports the following:
# syntax:
#
# 0,1,2,3,4,5,6,7,8,9,*,#
# x
# +
#
# []
C-12
# Eg. RTP packets are sent to port 3000.
# valid values are TFTP, FTP and HTTP
# can be IP or FQDN
# can be IP or FQDN
: matches the keypad symbols
: matches any digit (0...9)
: matches 0 or more repetitions of the
: previous expression
: matches any number inside the brackets
Three protocols