Status Code On Ignoring Incoming Calls - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

STATUS CODE ON IGNORING INCOMING CALLS

PARAMETER –
sip ignore status code
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
SWITCH FOCUS TO RINGING LINE
PARAMETER –
switch focus to ringing line
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CALL HOLD REMINDER SETTINGS
PARAMETER –
call hold reminder
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-176
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the status code that is sent in the response to the server
when a user ignores an incoming call.
Integer
486
Valid SIP final negative response code (Refer to RFC3261)
sip ignore status code: 486
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies whether or not the UI focus is switched to a ringing line
while the phone is in the connected state.
Boolean
1 (enable)
0 (disable)
1 (enable)
switch focus to ringing line: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the reminder ring splash timer to start as soon
as you put a call on hold (even when no other calls are active on the
phone). When enabled, the phone initiates a reminder ring splash
periodically for the single call on hold. When disabled, no reminder
ring splash is audible.
Boolean
0
0 (disable)
1 (enable)
call hold reminder: 1