PARAMETER
PARAMETER IN
IN
MITEL WEB UI
IP PHONE UI
Primary TFTP
TFTP Path
Path
Alternate TFTP
Alternate TFTP
Alternate TFTP
Alternate TFTP
Path
Path
Select TFTP
Use Alternate
TFTP
PARAMETERS IN
DESCRIPTION
CONFIGURATION
FILES
tftp path
Specifies the path name for which the
configuration files reside on the TFTP
server for downloading to the IP Phone.
If the IP phone's configuration and
firmware files are located in a
sub-directory beneath the server's root
directory, the relative path to that
sub-directory should be entered in this
field.
Note: Enter the path name in the form
folderX\folderX\folderX. For example,
ipphone\6867i\configfiles.
For more information, see Chapter 4,
"Configuration Server Protocol"
page
alternate tftp server
The alternate TFTP server's IP address
or qualified domain name. This will
become effective after this configuration
file has been downloaded into the phone.
For more information, see Chapter 4,
"Configuration Server Protocol"
page
alternate tftp path
Specifies the path name for which the
configuration files reside on the Alternate
TFTP server for downloading to the IP
Phone.
If the IP phone's configuration and
firmware files are located in a
sub-directory beneath the server's root
directory, the relative path to that
sub-directory should be entered in this
field.
For more information, see Chapter 4,
"Configuration Server Protocol"
page
use alternate tftp
Enables or disables the alternate TFTP
server. Valid values are "0" disabled and
"1" enabled.
For more information, see Chapter 4,
"Configuration Server Protocol"
page
Administrator Level Options
4-99.
4-99.
4-99.
4-99.
on
on
on
on
3-69