Mitel 6867i Administrator's Manual page 725

PARAMETER –
auto resync time
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
auto resync max delay
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Sets the time of day in a 24-hour period for the IP phone to be
automatically updated. This parameter works with TFTP, FTP,
HTTP and HTTPS servers.
Notes:
• The resync time is based on the local time of the IP phone.
• The value of 00:00 is 12:00 A.M.
• When selecting a value for this parameter in the Mitel Web UI, the
values are in 30-minute increments only.
• When entering a value for this parameter using the configuration
files, the value can be entered using minute values from 00 to 59
(for example, the auto resync time can be entered as 02:56).
• Auto-Resync adds as a default 15 minutes of random time to the
configured time. For example, if the auto resync time parameter
is set to 02:00, the event takes place any time between 02:00 and
02:15. This max delay can be configured using the "auto resync
max delay" parameter below.
• When the language on the phone is set to French or Spanish, you
must enter the time in the format "00h00" (configuration files only).
hh:mm
00h00 (for French and Spanish configuration files)
00:00
hh = 00 to 23
mm = 00 to 59
auto resync time: 03:24
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the maximum time, in minutes, the phone waits past the
scheduled time before starting a checksync.
Integer
15
0-1439
auto resync max delay: 20
A-27