Call Waiting Settings - Mitel 6867i Administrator's Manual

CALL WAITING SETTINGS

PARAMETER –
call waiting
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
call waiting tone
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to enable or disable Call Waiting on the IP phone.
If you enable call waiting (default), the user has the option of
accepting a second call while currently on the first call. If you disable
call waiting, and a user is currently on a call, a second incoming call
is automatically rejected by the phone with a busy message.
If you disable call waiting on the phone, and the user is on a call, any
further incoming calls will receive busy unless "Call Forward Busy"
or "Call Forward No Answer and Busy" is configured on the phone.
It will then forward the call according to the rule configured. The
phone can only:
• transfer the currently active call
or
• accept transferred calls if there is no active calls.
If call waiting is disabled:
• intercom calls are treated as regular incoming calls and are
rejected.
• pre-dialing with live dial pad disabled still accepts incoming calls.
• the Missed Calls List does not get updated with details of calls.
• the Blind Transfer feature on the phone may not work if two calls
are made to the phone at one time.
Boolean
1 (enabled)
0 (disabled)
1 (enabled)
call waiting: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enable or disables the playing of a call waiting tone when a caller is
on an active call and a new call comes into the phone.
Note: The Call Waiting Tone feature works only if the Call Waiting
parameter is enabled.
Boolean
1 (enabled)
0 (disable)
1 (enabled)
call waiting tone: 0
A-73