Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
7. Restart the phone for the selection to take affect.
For the 6873i:
1. Press
2. Press the Advanced softkey.
3. Enter the Administrator password and press the blue Enter key. Default is "22222".
4. Press the Network icon.
Note: If required, swipe left on the screen to navigate to the second page of options.
5. Press the DSCP icon.
6. Enter a value for "Type of Service SIP". Default is 26.
or
Enter a value for "Type of Service RTP". Default is 46.
or
Enter a value for "Type of Service RTCP". Default is 46.
Valid values are 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled,
you will need to map the applicable priority to the Protocol setting as shown in the
first table in
information, see the section
7. Press the Save softkey.
8. Restart the phone for the selection to take affect.
MITEL WEB UI
1. Click on Advanced Settings->Network->Type of Service DSCP.
2. Select a Protocol field:
"SIP"
or
"RTP"
or
"RTCP"
3. Enter a value from 0 to 63. Default values are as follows:
•
SIP = 26
•
RTP = 46
4-47
on the phone to enter the Options List.
"DSCP Range/VLAN Priority Mapping"
"Configuring VLAN (optional)"
on
page 4-44
For more
on
page
4-48.