Directed Call Pickup (Blf Or Xml Call Interception) Settings - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
DIRECTED CALL PICKUP (BLF OR XML CALL INTERCEPTION)
SETTINGS
PARAMETER –
directed call pickup
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
enhanced directed call pickup
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-210
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the use of "directed call pickup" feature.
Boolean
0 (disabled)
0 (disabled)
1 (enabled)
directed call pickup: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables the enhanced BLF directed call pickup feature.
If defined as "1", pressing a softkey corresponding to a ringing BLF
will not pick up the call immediately but will instead display the
remote caller's information first, allowing the user to review who is
calling.
When using the MiCloud Telepo platform, the parameter must be
defined as "3". In this mode, pressing a BLF key when the monitored
extension is ringing will cause the phone use the dialog information
sent in the NOTIFY message to form the INVITE request (the dialog
information will be detailed in the "Replaces" header of the INVITE).
Notes:
• Feature availability is dependent on your call manager.
• Applicable to the 6865i, 6867i, 6869i, 6873i IP phones only.
Boolean
0 (disabled)
0 - 3
0 (disabled)
1 (two-stage BLF for non-ALU call managers)
2 (reserved)
3 (directed call pickup for MiCloud Telepo)
enhanced directed call pickup: 3