Mitel 6867i Administrator's Manual page 1009

SAMPLE CONFIGURATION FILES
This section consists of the sample configuration files necessary to configure the IP phones.
The general format is similar to configuration files used by several Unix-based programs. Any
text following a number sign (#) on a line is considered to be a comment, unless the # is
contained within double-quotes. Currently, Boolean fields use 0 for false and 1 for true.
6869I SAMPLE CONFIGURATION FILE
# Sample Configuration File
# ===========================
# Phone Model: 6869i
# Notes:
#
# The general format used here is similar to configuration files
# used by several UNIX-based programs. Any text following a number
# sign (#) is considered to be a comment, unless the number sign is
# contained within double-quotes ("#") where it is considered to be
# a pound. For Boolean fields, 0 = false, 1 = true.
# Comments:
#
# This file contains sample configurations for the "startup.cfg", <model>.cfg, or
# "<mac>.cfg" file.
# You should change/comment the values to suit your requirements.
#
# Not all possible parameters are shown, refer to the admin guide for
# the full list of supported parameters, their defaults and valid
# ranges.
#
# The Mitel 6800 Series IP phones will download 2
# configuration files from the TFTP server while restarting, the
# "startup.cfg" file, the "<model>.cfg" file, and
# files can be used to configure all of the settings of the phone with
# the exception of assigning a static IP address to a phone and line
# settings, which should only be set in the "<mac>.cfg" file.
#
# The "startup.cfg" file configures the settings server wide, the "<model>.cfg" file contains model
# specific information (for example, "6869i.cfg"), while the "<mac>.cfg" file configures only the
# phone with the MAC address for which the file is named (for example, "00085d0304f4.cfg"). The
# settings in the "startup.cfg" file will be overridden by settings in the <model>.cfg file, and
# settings in the "<mac>.cfg" file override both settings in the "<model>.cfg" and the
# "startup.cfg" files.
#------------------------------------------------------------------
The settings included here are examples only.
Sample Configuration Files
the "<mac>.cfg" file. These three configuration
C-3