Mitel 6867i Administrator's Manual page 799

PARAMETER –
sip acd subscription period
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip bla subscription period
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip ignore refer event id
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the time period, in seconds, that the IP phone
re-subscribes the Automatic Call Distribution (ACD) subscription
service after a software/firmware upgrade or after a reboot of the
6865i, 6867i, 6869i, and 6873i IP phone.
Integer
3600
120 - 2147483647
sip acd subscription period: 2000
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the amount of time, in seconds, that the phone waits to
receive a BLA subscribe message from the server. If you specify
zero (0), the phone uses the value specified for the BLA expiration in
the subscribe message received from the server. If no value is
specified, the phone uses the default value of 300 seconds.
Integer
300
0-3700
Note: When set to zero (0), the phone uses BLA expiry value specified
in subscribe message.
sip bla subscription period: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies whether or not event IDs (i.e. Event: refer:id=xxxxx) in
REFER NOTIFY event headers received by the phone should be
ignored.
Boolean
0 (Disabled)
0 (Disabled - Check for valid event ID)
1 (Enabled - Ignore event ID)
sip ignore refer event id: 1
A-101