Call Hold Reminder During Active Calls - Mitel 6867i Administrator's Manual

MITEL WEB UI
1. Click on Basic Settings->Preferences->General.
2. The "Switch Focus to Ringing Line" field is enabled by default. To disable this field,
uncheck the box.
3. Click Save Settings to save your changes.

CALL HOLD REMINDER DURING ACTIVE CALLS

The IP phones allow a User or Administrator to enable or disable the ability for the phone to
initiate a continuous reminder tone on the active call when another call is on hold. For example,
when this feature is enabled, and the call on Line 1 is on hold, and then the User answers a
call on Line 2 and stays on that line, a reminder tone is played in the active audio path on Line
2 to remind the User that there is still a call on hold on Line 1.
When this feature is disabled, a ring splash is heard when the active call hangs up and there
is still a call on hold.
Your can enable or disable this feature using the "call hold reminder during active calls"
parameter in the configuration files or in the Mitel Web UI.
CONFIGURING "CALL HOLD REMINDER DURING ACTIVE CALLS"
You use the following procedure to enable or disable "Call Hold Reminder During Active Calls".
Operational Features
5-84