Mitel 6867i Administrator's Manual page 144

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER
IN
IP PHONE UI
N/A
N/A
N/A
3-74
PARAMETER IN PARAMETERS IN
MITEL WEB UI CONFIGURATION
FILES
Time (24-hour) auto resync time
Maximum Delay auto resync max
delay
Days auto resync days
DESCRIPTION
Sets the time of day in a 24-hour period
for the IP phone to be automatically
updated. This parameter works with
TFTP, FTP, and HTTP servers.
Notes:
The resync time is based on the local
1.
time of the IP phone.
The value of 00:00 is 12:00 A.M.
2.
When selecting a value for this
3.
parameter in the Mitel Web UI, the
values are in 30-minute increments
only.
When entering a value for this
4.
parameter using the configuration
files, the value can be entered using
minute values from 00 to 59 (for
example, the auto resync time can be
entered as 02:56).
For more information, see Chapter 8, the
section, "Using the Auto-Resync
Feature" on page 8-6.
Specifies the maximum time, in minutes,
the phone waits past the scheduled time
before starting a checksync.
For more information, see Chapter 8, the
section, "Using the Auto-Resync
Feature" on page 8-6.
Specifies the amount of days that the
phone waits between checksync
operations.
Note: A value of 0 causes the phone to
checksync every time the clock reads the
proper time. A value of 1 forces the phone
to wait 24 hours prior to doing the first
checksync.
For more information, see Chapter 8, the
section, "Using the Auto-Resync
Feature" on page 8-6.