Mitel 6867i Administrator's Manual page 390

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
Note: If the "Do Not Disturb" (DND) or the "Call Forward" (CFWD) feature is enabled
on the server-side, and the user is still waiting for a call, the "Bellcore-dr5" is a ring
splash tone that reminds the user that these are enabled.
CONFIGURING PRIORITY ALERTING AND RING TONE CADENCES USING
THE CONFIGURATION FILES
Use the following procedures to configure priority alerting and ring tone cadences on the IP
phones.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the sections,
•
"Priority Alert Settings"
•
"Bellcore Cadence Settings"
Note: You can configure Bellcore cadences using the configuration files only.
CONFIGURING PRIORITY ALERTING USING THE MITEL WEB UI
Use the following procedure to configure Priority Alerting using the Mitel Web UI.
MITEL WEB UI
1. Click on Basic Settings->Preferences.
2. In the "Priority Alerting Settings" section, enable the "Enable Priority Alerting" field by
checking the check box. (Disable this field by unchecking the box).
For Sylantro Servers:
3. Select a ring tone pattern for each of the following fields:
• Group
• External
5-129
on .
page A-182
on .
page A-187