Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
•
If a user is in a dialing state with the "Allow Barge-In" parameter enabled and a page is
received by the phone, the phone will automatically switch focus to the page screen.
•
If a user is in a dialing state with the "Allow Barge-In" parameter disabled and a page is
received by the phone, the phone will keep its focus on the dialing screen.
CONFIGURING GROUP PAGING RTP SETTINGS
Use the following procedure to configure Group Paging RTP Settings using the configuration
files.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Codec Negotiation Behavior"
Use the following procedure to configure RTP streaming for Paging applications using the Mitel
Web UI
.
MITEL WEB UI
1. Click on Basic Settings->Preferences->Group Paging RTP Settings.
2. In the "Paging Listen Addresses" text box, enter the multicast IP address(es) and port
number(s) on which the phone listens for incoming multicast RTP packets.
Notes:
1. Enter the IP address in dotted decimal format (for example,
2. The valid port range is from 1 to 65535.
3. Click on Softkeys and XML.
or
Click on Programmable Keys.
or
Click on Expansion Module Keys.
4. Choose a key that you want to assign as the Paging Key and select Paging from the "Type"
field.
5-107
on
page A-207
224.0.0.2:10000,239.0.1.20:15000) If this field is blank, Paging listening
capability is disabled on the phone.
.