Call Forward Key Mode Settings - Mitel 6867i Administrator's Manual

CALL FORWARD KEY MODE SETTINGS

PARAMETER –
call forward key mode
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Sets the mode for how the phone uses "call forwarding" (CFWD)
• account
The account mode allows you to configure CFWD on a per
account basis. Pressing a configured CFWD key applies to the
account in focus.
• phone
The Phone mode allows you to set the same CFWD configuration
for all accounts (All, Busy, and/or No Answer). When you
configure the initial account, the phone applies the configuration
to all other accounts. (In the Mitel Web UI, only the account you
configured is enabled. All other accounts are grayed out but set to
the same configuration.) Using the Mitel Web UI, if you make
changes to that initial account, the changes apply to all accounts
on the phone.
• custom
The Custom mode allows you to configure CFWD for a specific
account or all accounts. You can configure a specific mode (All,
Busy, and/or No Answer) for each account independently or all
accounts. On the 6863i and 6865i, you can set all accounts to
ALL On or ALL Off. On the 6867i, 6869i, and 6873i you can set
all accounts to All On, All Off, or copy the configuration for the
account in focus to all other accounts using a CopytoAll softkey.
Notes:
• If there is no CFWD key configured on the phone or it is removed,
you can still set the CFWD modes via the IP Phone UI at the path
Options->Call Forward.
• If there is only one account configured on the phone, then the
mode setting is ignored and the phone behaves as if the mode
was set to "Phone".
• When configuring a CFWD mode (All, Busy, No Answer) for an
account, you must configure a CFWD number for that mode in
order for the mode to be enabled.
Integer
0 (account)
0 (account)
1 (phone)
2 (custom)
call forward key mode: 2
A-157