Mitel 6867i Administrator's Manual page 688

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
2. In the Port field, enter the port or ports from where the phone should capture traffic (e.g.
5000:6000;7000).
Notes:
1. The default is 5060.
2. Use a colon (i.e. ":") or hyphen (i.e. "-") to set a range. For example, 5000:6000
3. Use a semi-colon (i.e. ";") to add individual ports. For example, 5000;6000;7000
4. Ranges and individual ports can be combined. For example, 5000:7000;8000
5. Packets on port 23 (Telnet) will not be captured.
3. In the Timeout field, enter the amount of time (in hours) the capture should extend until
(e.g. 48).
Notes:
1. The default is 24 hours.
2. The range is from 1 hour to 168 hours (7 days).
4. Click Save Settings.
5. Click on Advanced Settings > Capture.
6. Click Start to begin the capture.
Note: At any time, navigate back to Advanced Settings > Capture and click Stop
to end the capture manually. Otherwise, the capture will end automatically when
the timeout has been reached.
7. When the capture has ended, navigate back to Advanced Settings > Capture and click
the Get capture file -- Save As... button to save the tcpdump.pcap file.
9-20
or 5000-6000 will capture traffic from ports 5000 through to 6000.
will capture traffic from ports 5000, 6000, and 7000.
will capture traffic from ports 5000 through to 7000 as well as capture traffic
from port 8000.