Mitel 6867i Administrator's Manual page 818

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
sip dtmf method
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip srtp mode
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-120
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Sets the Dual-tone multifrequency (DTMF) method to use on the IP
phone.
See ""Out-of-Band DTMF and DTMF Method‚" on
Note:
page 89" for DTMF behavior information when this parameter
is used in conjunction with the "sip out-of-band dtmf"
parameter.
Boolean
0 (RTP)
0 (RTP)
1 (SIP INFO)
2 (BOTH)
sip dtmf method: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
This parameter determines if SRTP is enabled on this IP phone, as
follows:
• If set to 0, then disable SRTP.
• If set to 1 then SRTP calls are preferred.
• If set to 2, then SRTP calls only are generated/accepted.
Integer
0 (SRTP Disabled)
0 (SRTP Disabled)
1 (SRTP Preferred)
2 (SRTP Only)
sip srtp mode: 1